基于基线长度加权的GNSS多天线姿态测量方法
作者:
作者单位:

中国石油大学(华东)海洋与空间信息学院

作者简介:

通讯作者:

中图分类号:

P228

基金项目:

国家自然科学基金资助(42174021,42074028);国家重点研发计划(2016YFB0501700,2016YFB0501705);山东省自然科学基金资助项目(ZR2016DQ01,ZR2020MD042,ZR2019MD005)


GNSS multi-antenna attitude measurement method based on
Author:
Affiliation:

School of ocean and spatial information, China University of Petroleum (East China)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    GNSS可用于获取动态载体的姿态信息,为提高其姿态测量精度,提出一种基于基线长度信息对最小二乘姿态解算方法进行加权处理,改进了最小二乘姿态解算方法,同时通过船载实验验证了该方法的可用性。实验结果表明:在船载动态实验中,当基线长度存在明显差异时,加权最小二乘法较等权最小二乘法在精度上明显提高,其中横滚角的精度提高了13 %。

    Abstract:

    GNSS can be used to obtain the attitude information of dynamic carrier. In order to improve its attitude measurement accuracy, this study proposes a weighted least squares attitude solution method based on baseline length information, which improves the least squares attitude solution method. At the same time, the availability of this method is verified by shipboard experiment. The experimental results show that in the ship borne dynamic experiment, when there is an obvious difference in the baseline length, the accuracy of the weighted least square method is significantly higher than that of the equal weight least square method, and the accuracy of roll angle is increased by 13 %.

    相似文献
    引证文献
引用本文

韦永僧,贺凯飞,刘笃学,杨金权.基于基线长度加权的GNSS多天线姿态测量方法[J].遥测遥控,2022,43(3):18-23.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
    参考文献
历史
  • 收稿日期:2021-09-15
  • 最后修改日期:2022-03-22
  • 录用日期:2021-12-06
  • 在线发布日期: 2022-05-31
  • 出版日期:
  • 优先出版日期: 2022-05-31